+91-7695899130
+91-7695899130
PETROCHEMICA aimed to provide an international forum for the academic and industrial researchers to showcase their investigations in variable fields of Petroleum, Chemical and Control Engineering. All the articles will be published within a minimum period of time. Research articles, project reports, book reviews, case studies, short communications, symposia proceedings and review articles are accepted.This is a quarterly international research journal that invites contributions of novel research in different disciplines of petroleum, chemical and control engineering.
Petroleum engineering includes various disciplines such as: Geophysics, petroleum geology, formation evaluation (well logging), drilling, economics, fluid mechanics, reservoir simulation, reservoir engineering, well engineering, artificial lift systems, completions and petroleum and production engineering.
Similarly, various disciplines that involve the knowledge of chemical engineering includes, environmental chemicals and process engineering, pollution control, resources recovery, bioenergy, environmental nanotechnology, reaction kinetics, applied catalysis, reactors, material synthesis and processing, mining mineral extraction and processing, food production and pharmaceutical.
For control engineering that includes all control algorithms like adaptive, genetic, etc., Studies using optimization techniques are also invited.
Papers which describe novel theory and its application to practice are welcomed. Reports of the experimental work done are also invited. Manuscripts of other disciplines that are integrated with chemical engineering are also invited
The publication of an article in a peer-reviewed journal is an essential building block in the development of a coherent and respected network of knowledge. It is a direct reflection of the quality of the work of the authors and the institutions that support them. Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, the publisher and the society of society-owned or sponsored journals.
Authors of reports of original research should present an accurate account of the work performed as well as an objective discussion of its significance. Underlying data should be represented accurately in the paper. A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behaviour and are unacceptable. Review and professional publication articles should also be accurate and objective, and editorial ‘opinion’ works should be clearly identified as such.
The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted and permission has been obtained where necessary. Proper acknowledgment of the work of others must always be given. Authors should cite publications that have influenced the reported work and that give the work appropriate context within the larger scholarly record. Information obtained privately, as in conversation, correspondence, or discussion with third parties, must not be used or reported without explicit, written permission from the source. Plagiarism takes many forms, from ‘passing off’ another’s paper as the author’s own paper, to copying or paraphrasing substantial parts of another’s paper (without attribution), to claiming results from research conducted by others. Plagiarism in all its forms constitutes unethical behaviour and is unacceptable.
An author should not in general publish manuscripts describing essentially the same research in more than one journal of primary publication. Submitting the same manuscript to more than one journal concurrently constitutes unethical behaviour and is unacceptable. In general, an author should not submit for consideration in another journal a paper that has been published previously, except in the form of an abstract or as part of a published lecture or academic thesis or as an electronic preprint.
When an author discovers a significant error or inaccuracy in their own published work, it is the author’s obligation to promptly notify the journal editor or publisher and cooperate with the editor to retract or correct the paper if deemed necessary by the editor. If the editor or the publisher learn from a third party that a published work contains an error, it is the obligation of the author to cooperate with the editor, including providing evidence to the editor where requested.
Submission fan article implies that the work described has not been published previously (except in the form of an abstract, a published lecture or academic thesis, see' Multiple, redundant or concurrent publication' for more information), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by there responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in Englishorinanyotherlanguage, including electronically without the written consent of the copyright- holder. To verify originality, your article may be checked by the originality detection service Crossref Similarity Check. (Courtesy: https://www.elsevier.com/about/policies/publishing-ethics)
Editor-in-Chief:
Balraj Baskaran, Ph.D.,
K. Ramakrishnan College of Technology,
Samayapuram, Tiruchirappalli, India.
Email - balrajb.eee@krct.ac.in
Associate Editorial Board:
Siva Chidambaram, Ph.D.,
SRM University, Kattankulathur, India
Email - siva.c@ktr.srmuniv.ac.in
Editorial Board :
Senthilkumar N, Ph.D.,
M. Kumarasamy College of Engineering,
Karur, India
Email - senthilkumarn.ece@mkce.ac.in
Editorial Board:
Dr. S. Abimanyu
Department of Pharmaceutics, SRM College of Pharmacy,
SRM Institute of Science and Technology, Kattankulathur, India.
Email -abimanyu.s@ktr.srmuniv.ac.in
Editorial Board:
Dr. E. NandhaKumar
Department of Electrical and Electronics Engineering, Sasurie College of Engineering, Tiruppur, India.
Email - sceprincipal@sasurie.com
Will be updated shortly…
Electrinx is a integration of three major disciplines, Electrical, Electronics and Instrumentation Engineering.
Electrical engineering deals with the study and application of electricity, electronic and electromagnetism. Electrical engineering in our journal include the core subjects like electrical machines and drives, electrostatics, digital appliances, power electronics, motion control hardware and software, electrical technologies, power electrical circuits , industrial process control, electromagnetic compatability, devices and systems, microelectromechanics, robotics and automotive electronics.
Electronic engineering is involved with the development of small-scale electronic systems to transmit information. It involves understanding the flow of electricity in a circuit and also designing circuit boards. Subfields of electronic engineering are analog electronics, digital electronics, consumer electronics, embedded systems and power electronics. Instrumentation is defined as the art and science of measurement and control of the process variables within a production or manufacturing area. The journal focusses on all technical and practical aspects of instrumentation engineering and control systems.
Instrumentation and control components, measurement techniques, biomedical instrumentation, industrial automation, automation and control, linear and non linear control systems, robust control, neuro-fuzzy control, adaptive control, sampled- data control systems and digital control, automated guided vehicles, neural networks and fuzzy logic, system identification and control, genetic algorithms and evolutionary computing, mathematical and computer modelling, industry, military, space applications, agriculture, health and environment applications, process control, transducers, optimal control, recent trends in instrumentation.
The publication of an article in a peer-reviewed journal is an essential building block in the development of a coherent and respected network of knowledge. It is a direct reflection of the quality of the work of the authors and the institutions that support them. Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, the publisher and the society of society-owned or sponsored journals.
Authors of reports of original research should present an accurate account of the work performed as well as an objective discussion of its significance. Underlying data should be represented accurately in the paper. A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behaviour and are unacceptable. Review and professional publication articles should also be accurate and objective, and editorial ‘opinion’ works should be clearly identified as such.
The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted and permission has been obtained where necessary. Proper acknowledgment of the work of others must always be given. Authors should cite publications that have influenced the reported work and that give the work appropriate context within the larger scholarly record. Information obtained privately, as in conversation, correspondence, or discussion with third parties, must not be used or reported without explicit, written permission from the source. Plagiarism takes many forms, from ‘passing off’ another’s paper as the author’s own paper, to copying or paraphrasing substantial parts of another’s paper (without attribution), to claiming results from research conducted by others. Plagiarism in all its forms constitutes unethical behaviour and is unacceptable.
An author should not in general publish manuscripts describing essentially the same research in more than one journal of primary publication. Submitting the same manuscript to more than one journal concurrently constitutes unethical behaviour and is unacceptable. In general, an author should not submit for consideration in another journal a paper that has been published previously, except in the form of an abstract or as part of a published lecture or academic thesis or as an electronic preprint.
When an author discovers a significant error or inaccuracy in their own published work, it is the author’s obligation to promptly notify the journal editor or publisher and cooperate with the editor to retract or correct the paper if deemed necessary by the editor. If the editor or the publisher learn from a third party that a published work contains an error, it is the obligation of the author to cooperate with the editor, including providing evidence to the editor where requested.
Submission fan article implies that the work described has not been published previously (except in the form of an abstract, a published lecture or academic thesis, see' Multiple, redundant or concurrent publication' for more information), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by there responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in Englishorinanyotherlanguage, including electronically without the written consent of the copyright- holder. To verify originality, your article may be checked by the originality detection service Crossref Similarity Check. (Courtesy: https://www.elsevier.com/about/policies/publishing-ethics)
Will be updated shortly…
Will be updated shortly…
The journal’s scope is to publish investigations and experimental results of the researchers and industrialists in the field of mechanical, metallurgical and material engineering and its sub-disciplines:
Metamateria consists of three major specialisations: mechanical engineering is a blend of theoretical understanding and practical applications. It is a broad discipline that deals with the improvement and modification of mechanical components (machines) and systems. This discipline finds its application in the fields of mechanics, fluid dynamics, heat transfer, design and simulation of machines, commercial and residential construction, heating and cooling, mining, motorsport, marine, army and defence force, nuclear power, automotives, manufacturing and processing , acoustics, aerospace.
Metallurgical engineering is dealt with understanding and manipulating metals for use. It is involved in extraction of elements from the ground and in transformation of metals for use in chemistry and electricity. It has some overlap in mining engineering also.
Material science engineering is dedicated to the creation and refinement of useful materials from raw resources for specific applications. It involves the extraction and processing of raw materials and selection for appropriate application. Almost all disciplines and industries require the use of material engineering at some stage.
The publication of an article in a peer-reviewed journal is an essential building block in the development of a coherent and respected network of knowledge. It is a direct reflection of the quality of the work of the authors and the institutions that support them. Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, the publisher and the society of society-owned or sponsored journals.
Authors of reports of original research should present an accurate account of the work performed as well as an objective discussion of its significance. Underlying data should be represented accurately in the paper. A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behaviour and are unacceptable. Review and professional publication articles should also be accurate and objective, and editorial ‘opinion’ works should be clearly identified as such.
The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted and permission has been obtained where necessary. Proper acknowledgment of the work of others must always be given. Authors should cite publications that have influenced the reported work and that give the work appropriate context within the larger scholarly record. Information obtained privately, as in conversation, correspondence, or discussion with third parties, must not be used or reported without explicit, written permission from the source. Plagiarism takes many forms, from ‘passing off’ another’s paper as the author’s own paper, to copying or paraphrasing substantial parts of another’s paper (without attribution), to claiming results from research conducted by others. Plagiarism in all its forms constitutes unethical behaviour and is unacceptable.
An author should not in general publish manuscripts describing essentially the same research in more than one journal of primary publication. Submitting the same manuscript to more than one journal concurrently constitutes unethical behaviour and is unacceptable. In general, an author should not submit for consideration in another journal a paper that has been published previously, except in the form of an abstract or as part of a published lecture or academic thesis or as an electronic preprint.
When an author discovers a significant error or inaccuracy in their own published work, it is the author’s obligation to promptly notify the journal editor or publisher and cooperate with the editor to retract or correct the paper if deemed necessary by the editor. If the editor or the publisher learn from a third party that a published work contains an error, it is the obligation of the author to cooperate with the editor, including providing evidence to the editor where requested.
Submission fan article implies that the work described has not been published previously (except in the form of an abstract, a published lecture or academic thesis, see' Multiple, redundant or concurrent publication' for more information), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by there responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in Englishorinanyotherlanguage, including electronically without the written consent of the copyright- holder. To verify originality, your article may be checked by the originality detection service Crossref Similarity Check. (Courtesy: https://www.elsevier.com/about/policies/publishing-ethics)
Will be updated shortly…
Will be updated shortly…
Civil engineering is the improvement of civil society through the application of scientific knowledge. Civil requirements in today’s society are focused on meeting basic human needs and assisting people in their daily lives. These needs are met by improving infrastructure and common utilities.
Scope of civil engineering include Construction Engineering, Earthquake engineering, Ecological Engineering, Environmental Engineering, Fire Protection Engineering, Geotechnical Engineering, Highway Engineering, Hydraulic Engineering, Mining Engineering, Railway Engineering, Traffic Engineering, Transportation Engineering, Water Resource Engineering, Building Materials and Structures, Coastal and Harbor Engineering, Construction Economy and Management, Renovation of Buildings, Road and Bridge Engineering, Surveying and Geo Spatial Engineering, Tunnel Engineering, Urban Engineering and Economy, Urban drainage, Forensic engineering.
Structural Engineering is concerned with the structural design and structural analysis of buildings, bridges, towers, flyovers, tunnels, off shore structures like oil and gas fields in the sea, aerostructure and other structures.
The discussions on the topic includes the art and science of structural modelling and design, develop, apply and interpret the results of novel analytical, computational and experimental simulation techniques, Rehabilitation and monitoring of existing structures.
Architectural Engineering : the scope of the journal topics include: Acoustics, Construction, Construction Management, Controls, electrical engineering and systems, indoor environmental quality, lighting and day lighting, mechanical engineering and systems, rehabilitation of existing structures, structural assessment, sustainable construction or design.
The publication of an article in a peer-reviewed journal is an essential building block in the development of a coherent and respected network of knowledge. It is a direct reflection of the quality of the work of the authors and the institutions that support them. Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, the publisher and the society of society-owned or sponsored journals.
Authors of reports of original research should present an accurate account of the work performed as well as an objective discussion of its significance. Underlying data should be represented accurately in the paper. A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behaviour and are unacceptable. Review and professional publication articles should also be accurate and objective, and editorial ‘opinion’ works should be clearly identified as such.
The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted and permission has been obtained where necessary. Proper acknowledgment of the work of others must always be given. Authors should cite publications that have influenced the reported work and that give the work appropriate context within the larger scholarly record. Information obtained privately, as in conversation, correspondence, or discussion with third parties, must not be used or reported without explicit, written permission from the source. Plagiarism takes many forms, from ‘passing off’ another’s paper as the author’s own paper, to copying or paraphrasing substantial parts of another’s paper (without attribution), to claiming results from research conducted by others. Plagiarism in all its forms constitutes unethical behaviour and is unacceptable.
An author should not in general publish manuscripts describing essentially the same research in more than one journal of primary publication. Submitting the same manuscript to more than one journal concurrently constitutes unethical behaviour and is unacceptable. In general, an author should not submit for consideration in another journal a paper that has been published previously, except in the form of an abstract or as part of a published lecture or academic thesis or as an electronic preprint.
When an author discovers a significant error or inaccuracy in their own published work, it is the author’s obligation to promptly notify the journal editor or publisher and cooperate with the editor to retract or correct the paper if deemed necessary by the editor. If the editor or the publisher learn from a third party that a published work contains an error, it is the obligation of the author to cooperate with the editor, including providing evidence to the editor where requested.
Submission fan article implies that the work described has not been published previously (except in the form of an abstract, a published lecture or academic thesis, see' Multiple, redundant or concurrent publication' for more information), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by there responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in Englishorinanyotherlanguage, including electronically without the written consent of the copyright- holder. To verify originality, your article may be checked by the originality detection service Crossref Similarity Check. (Courtesy: https://www.elsevier.com/about/policies/publishing-ethics)
Will be updated shortly…
Will be updated shortly…
Journal of Communication, Computer and Networks is an open access peer-reviewed academic journal covering research works in the fields of communication and networking. It is an international journal intended for professionals and researchers in all fields of Engineering, for programmers, software and hardware manufacturers.
Communication: Scope: analog communication, digital communication, large scale telecommunication, radio communication, digital signal processing, Electromagnetic waves, Modulation of signals, Advanced digital communication, wireless communication, telephone networks, satellite and deep-space communication, terrestrial cellular networks, data storage systems, optical communication.
Computer network architecture, communication network protocols, network services and applications, discrete algorithm and discrete modelling, network operation and management, network security and privacy, cloud and fog computing, internet of things, mobile and wireless networks, high speed networks, next generation internet, Qos and resource management, Adhoc and sensor networks.
The publication of an article in a peer-reviewed journal is an essential building block in the development of a coherent and respected network of knowledge. It is a direct reflection of the quality of the work of the authors and the institutions that support them. Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, the publisher and the society of society-owned or sponsored journals.
Authors of reports of original research should present an accurate account of the work performed as well as an objective discussion of its significance. Underlying data should be represented accurately in the paper. A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behaviour and are unacceptable. Review and professional publication articles should also be accurate and objective, and editorial ‘opinion’ works should be clearly identified as such.
The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted and permission has been obtained where necessary. Proper acknowledgment of the work of others must always be given. Authors should cite publications that have influenced the reported work and that give the work appropriate context within the larger scholarly record. Information obtained privately, as in conversation, correspondence, or discussion with third parties, must not be used or reported without explicit, written permission from the source. Plagiarism takes many forms, from ‘passing off’ another’s paper as the author’s own paper, to copying or paraphrasing substantial parts of another’s paper (without attribution), to claiming results from research conducted by others. Plagiarism in all its forms constitutes unethical behaviour and is unacceptable.
An author should not in general publish manuscripts describing essentially the same research in more than one journal of primary publication. Submitting the same manuscript to more than one journal concurrently constitutes unethical behaviour and is unacceptable. In general, an author should not submit for consideration in another journal a paper that has been published previously, except in the form of an abstract or as part of a published lecture or academic thesis or as an electronic preprint.
When an author discovers a significant error or inaccuracy in their own published work, it is the author’s obligation to promptly notify the journal editor or publisher and cooperate with the editor to retract or correct the paper if deemed necessary by the editor. If the editor or the publisher learn from a third party that a published work contains an error, it is the obligation of the author to cooperate with the editor, including providing evidence to the editor where requested.
Submission fan article implies that the work described has not been published previously (except in the form of an abstract, a published lecture or academic thesis, see' Multiple, redundant or concurrent publication' for more information), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by there responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in Englishorinanyotherlanguage, including electronically without the written consent of the copyright- holder. To verify originality, your article may be checked by the originality detection service Crossref Similarity Check. (Courtesy: https://www.elsevier.com/about/policies/publishing-ethics)
Will be updated shortly…
Will be updated shortly…
The main aim of the journal is to publish modern scientific ideas and researches in the field of physical sciences among scientists in the international level. Researches in the field of Physical Sciences which including classical and applied physics, atomic and molecular physics, nuclear physics, statistical and quantum mechanics, mathematical and chemical physics, biophysics and geophysics, semiconductor and metals fluid, dielectrics and ferroelectrics, surface science, earth science, thermodynamics and nonlinear systems, wireless and optical communications, crystallography and computer-aided materials design, etc.
Researches in the field of Chemical Sciences which including analytical chemistry, including new techniques and instrumentation, Biochemistry and medicinal chemistry, Inorganic chemistry, including main group, transition metal, and f-block compounds, as well as coordination, organometallic, and solid state chemistry, Materials chemistry of hard and soft matter, from the nanoscale upwards, Nuclear chemistry and radioactivity, Organic chemistry, including synthesis, characterization, and properties of organic compounds, as well as study of organic reactions and their mechanisms, Physical chemistry and chemical physics Sustainable, green, and environmental chemistry Theoretical and computational chemistry.
Researches in the field of Biological Sciences which including Field of Plant, Animal and Environmental sciences, Biotechnology, Pharmaceutical sciences and renewable energy.
The publication of an article in a peer-reviewed journal is an essential building block in the development of a coherent and respected network of knowledge. It is a direct reflection of the quality of the work of the authors and the institutions that support them. Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, the publisher and the society of society-owned or sponsored journals.
Authors of reports of original research should present an accurate account of the work performed as well as an objective discussion of its significance. Underlying data should be represented accurately in the paper. A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behaviour and are unacceptable. Review and professional publication articles should also be accurate and objective, and editorial ‘opinion’ works should be clearly identified as such.
The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted and permission has been obtained where necessary. Proper acknowledgment of the work of others must always be given. Authors should cite publications that have influenced the reported work and that give the work appropriate context within the larger scholarly record. Information obtained privately, as in conversation, correspondence, or discussion with third parties, must not be used or reported without explicit, written permission from the source. Plagiarism takes many forms, from ‘passing off’ another’s paper as the author’s own paper, to copying or paraphrasing substantial parts of another’s paper (without attribution), to claiming results from research conducted by others. Plagiarism in all its forms constitutes unethical behaviour and is unacceptable.
An author should not in general publish manuscripts describing essentially the same research in more than one journal of primary publication. Submitting the same manuscript to more than one journal concurrently constitutes unethical behaviour and is unacceptable. In general, an author should not submit for consideration in another journal a paper that has been published previously, except in the form of an abstract or as part of a published lecture or academic thesis or as an electronic preprint.
When an author discovers a significant error or inaccuracy in their own published work, it is the author’s obligation to promptly notify the journal editor or publisher and cooperate with the editor to retract or correct the paper if deemed necessary by the editor. If the editor or the publisher learn from a third party that a published work contains an error, it is the obligation of the author to cooperate with the editor, including providing evidence to the editor where requested.
Submission fan article implies that the work described has not been published previously (except in the form of an abstract, a published lecture or academic thesis, see' Multiple, redundant or concurrent publication' for more information), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by there responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in Englishorinanyotherlanguage, including electronically without the written consent of the copyright- holder. To verify originality, your article may be checked by the originality detection service Crossref Similarity Check. (Courtesy: https://www.elsevier.com/about/policies/publishing-ethics)
Editor-in-Chief:
Balraj Baskaran, Ph.D.,
Sri Krishna College of Technology, Coimbatore, India
Editorial Board:
Will be Updated Shortly.
Will be updated shortly…